Vendor compliance guide · Updated for 2026

Vendor Compliance: The COI, W-9 and License Checklist

What to collect from every vendor or subcontractor before they start work, what to check on each document, and how to keep it all current. Plus what contractors should have ready to get hired faster.

This guide is for anyone who hires vendors:

Property managersFacility managersGeneral contractorsHOAsBusiness ownersContractors and subcontractors

What vendor compliance means

Vendor compliance is the paperwork that proves a contractor is insured, licensed and set up to be paid correctly before they do work for you. If a vendor's coverage has lapsed and something goes wrong on the job, the claim can land on your own insurance, or on your client's. Whether you manage buildings, run a construction project or own the business, you're the one who has to explain why the paperwork wasn't checked.

For most companies, vendor compliance comes down to four documents:

DocumentWhat it provesWhen to collect it
Certificate of insurance (COI)The vendor carries the coverage you requireBefore the first job, and again at every policy renewal
Form W-9Their legal name and taxpayer ID for 1099 reportingBefore the first payment
LicensesThey are legally allowed to do the trade workBefore the first job, and at each renewal
Signed agreement or subcontractScope, insurance terms, indemnity and payment termsBefore the first job

Certificates of insurance (COIs)

A certificate of insurance is a one-page summary of a vendor's policies, usually on an ACORD 25 form issued by their insurance agent. It is a snapshot: it shows coverage on the day it was issued, not proof that the policy is still active today. That is why expiration dates matter as much as the coverage itself.

Coverage to require

  • Commercial general liability. Covers property damage and injuries caused by the vendor's work. Many companies ask for $1 million per occurrence and $2 million aggregate, but your contracts, clients and insurance carrier set the real minimums.
  • Workers' compensation. Covers the vendor's own employees if they are hurt on the job. Some very small vendors are exempt under state rules, so ask for proof of the exemption instead of skipping the requirement.
  • Commercial auto. For any vendor who drives company vehicles to your sites.
  • Umbrella or excess liability. Often required for higher-risk work such as roofing, electrical, tree work and anything at height.

What to check on every COI

  • Additional insured. Your company should be named as an additional insured on the vendor's general liability policy, along with the property owner or project owner when your contract requires it. The certificate alone does not add you; the vendor's policy needs an additional insured endorsement.
  • Certificate holder. Make sure the certificate holder name and address are correct.
  • Policy dates. Confirm every policy is active today and note each expiration date.
  • Limits. Compare each limit against your written requirements.
  • Waiver of subrogation and primary/non-contributory wording, if your agreement requires them.
  • Named insured. The business name should match the vendor's W-9 and the company actually doing the work.

If a COI looks off, call the insurance agent listed on the certificate to confirm the coverage. It takes five minutes and catches most problems.

W-9s and 1099s

Form W-9 gives you a vendor's legal name, business type and taxpayer identification number (TIN). You need it to file Form 1099-NEC, the form that reports payments to non-employee contractors to the IRS.

  • Collect the W-9 before the first payment. Chasing a W-9 in January from a vendor you paid in March is the most common 1099 headache.
  • The 2026 threshold is $2,000. For payments made in 2026, a 1099-NEC is generally required when you pay a vendor $2,000 or more for services during the calendar year. For payments made in 2025 and earlier, the threshold was $600. The new threshold is indexed for inflation starting in 2027.
  • Corporations are generally exempt from 1099-NEC reporting, with exceptions such as payments to attorneys. The W-9 tells you how the vendor is set up.
  • No TIN can mean backup withholding. If a vendor won't provide a valid TIN, you may be required to withhold a portion of reportable payments and send it to the IRS.

This section is general information, not tax advice. Confirm your filing obligations with your accountant.

Contractor licenses

Licensing rules vary by state, trade and job size. In Alabama, Georgia and Tennessee, trades such as HVAC, electrical and plumbing generally require a state license, and general contracting above certain dollar thresholds does too. Many cities and counties also require a local business license.

  • Ask for the license number, not just a copy, and look it up on the state licensing board's website.
  • Check that the license is active and covers the type of work you are hiring for.
  • Record the expiration date alongside the vendor's insurance dates.

Keeping documents current

Collecting documents once is the easy part. Compliance breaks down months later, when a policy renews and nobody asks for the new certificate. A simple routine prevents most gaps:

  1. Keep every vendor's documents in one place, not spread across inboxes and shared drives.
  2. Track the expiration date of every policy and license.
  3. Ask for renewed COIs about 30 days before expiration.
  4. Pause new work to any vendor with lapsed coverage until an updated certificate arrives.
  5. Review your coverage requirements with your insurance carrier once a year.

The vendor compliance checklist

  • Signed agreement or subcontract with insurance and indemnity terms
  • Current COI showing general liability at your required limits
  • Workers' compensation coverage, or proof of a state exemption
  • Commercial auto coverage for vendors driving to your sites
  • Umbrella coverage for higher-risk trades
  • Additional insured endorsement naming your company (and the owner, if required)
  • Certificate holder name and address correct
  • Form W-9 on file with a valid TIN before the first payment
  • State trade license verified on the licensing board website
  • Local business license, where required
  • Expiration dates recorded for every policy and license
  • Renewal requests scheduled about 30 days before each expiration

For contractors: get compliant, get hired

If you're the one doing the work, being easy to verify is a competitive advantage. Property managers, general contractors and facility teams often choose the vendor whose paperwork is ready over the one they have to chase. Keep this packet ready to send the same day someone asks:

  • A current COI, and a quick way to get new certificates from your agent with a client added as additional insured.
  • A completed, signed W-9.
  • Your license numbers for every state and trade you work in, with expiration dates.
  • Your business license for the cities and counties you serve.
  • A renewal calendar, so you send updated certificates before clients have to ask.

Commercial clients notice when renewals arrive before the old certificate expires. It is one of the simplest ways to stay on their preferred vendor list.

Keep every COI, W-9 and license in one place

ConekPro stores compliance documents next to the work orders and payments they belong to, for the companies hiring and the contractors doing the work.

Vendor compliance FAQ

What is a certificate of insurance (COI)?

A COI is a one-page summary of a contractor's insurance policies, usually on an ACORD 25 form issued by their agent. It shows the types of coverage, limits and policy dates as of the day it was issued.

Do I need a W-9 from every vendor?

Collect a W-9 from every vendor or subcontractor you pay for services, before the first payment. It gives you the legal name and taxpayer ID you need if a 1099-NEC is required.

What is the 1099-NEC threshold for 2026?

For payments made in 2026, a 1099-NEC is generally required when you pay a contractor $2,000 or more for services during the year. The threshold was $600 for payments made in 2025 and earlier.

What does "additional insured" mean?

An additional insured is a person or company added to the vendor's liability policy so the policy can respond to claims against them arising from the vendor's work. Hiring companies usually require to be named, often along with the property or project owner, which requires an endorsement on the vendor's policy.

How often should I collect a new COI?

At least every time a vendor's policy renews, which is usually once a year. Request the renewed certificate about 30 days before the old one expires.

What documents do contractors need to get commercial work?

Most commercial clients ask for a current certificate of insurance, a signed W-9, state trade license numbers and a local business license. Having them ready to send the same day makes you easier to hire.

This guide is general information and is not legal, insurance or tax advice. Your contracts, clients, insurance carrier and accountant set the requirements that apply to you.

© 2026 ConekPro. All rights reserved.

QUICK DEMO

See ConekPro in action

We'll walk through how ConekPro is your business network for collaboration. No pressure, no sales script.